EM Electronics casting sleeve package

EM Electronics casting sleeve package to make a watertight connection at the transition of AC cabling such as YMVK or neoprene. Avoid insulation errors!

The package contains:

• 286ml Cellpack resin
• 1 junction box IP54 with 7 inputs
• 3 cable glands M25x1.5 IP68
• 4 4-fold welding clamp
• 1 connector 10m2 for earth wires
• set of gloves

Note: If you want to connect the flexible cable, you will need a welding clamp, as a crown block can damage the individual wires, causing resistance.

Step 1: Place the cable glands on the cable box and tighten them, loosening the sealing plates.

Step 2: Strip the cables. In the case of ground cable, cut away the steel sheath and free the ground lug. Feed the cables through the cable glands into the cable box and tighten the glands.

Step 3: Connect the wires using the welding clamps and, if necessary, the earth titze with the supplied terminal block.

Step 4: Check the function of the connections before pouring in the resin!

Step 5: Put on the gloves and remove the sealing strip from the casting resin

Step 6: Cut a corner from the casting resin packaging and carefully pour the contents into the cable box.

Step 7: Let the resin-filled cable box cure for 1 hour.

Step 8: Screw the lid onto the cable box.

Step 9: Optionally dig the cable box into the ground and make sure it is completely covered.