SolarEdge Home Hub SE4000H 1-phase

The SolarEdge Home Hub SE4000H 1-phase is an all-in-one solution! It works seamlessly with

You can connect a Solaredge Home Battery 10KW HV to theSolarEdge Home Hub SE4000H 1-phase. As with a traditional Solaredge system, you need to fit ps panel with an optimiser and the inverter is easy to set up with the SetApp.
SolarEdge inverters are known for maximising power by optimising ps panel individually using power optimisers. Very useful if you have a shadow plane moving across all the solar panels during the day, or if you want to use many different orientations.

For an inverter like this to work, all the panels in the set must be fitted with a SolarEdge optimiser. You can connect the SolarEdge Home Hub SE4000H 1-phase to the internet using an Ethernet cable. Wi-Fi connection can be achieved through a Solaredge Antenna.

You may connect a maximum peak power of 8000wp to the SolarEdge Home Hub SE4000H 1-phase, but it will never convert more than 4000watt at a time. This is significantly higher so you can fit a smaller inverter for higher power! The inverter needs at least 8 of the S440 or S500 optimisers to work and at least 6 with the S500B optimiser, you don’t need to connect a home battery right away you can add this later!

The factory is in Israel and offers a 12-year warranty.

For more information, also check out the datasheet, or SolarEdge‘s website.